home

  

home

     |     

site map

  

site map

     |     

shipping

  

shipping

     |     

contact

  

contact

     |     

cart

  

cart

     

www.buyportablesolar.com.au




 
  English
United Kingdom
Australia
Spanish
German
French

FlexSolarCells.com - Flexible Solar Technology

Shipping



    

  Any Product

    

  Any Quantity

    

  Any Destination



Free Shipping

   


0
0 OEM Components | Rollable Panels | Foldable Panels | LightSaver | Accessories 0
0

NEW PowerFilm Product Available on Indiegogo
PowerFilm Solar is currently running an Indiegogo campaign to fund a new product, the LightSaver Max. The project is fully funded already, but you can support this campaign and place your order to be the first to receive the new LightSaver Max. For more information, click HERE.


     
 

  Rollable Panels

 
   
 
 
   

 
     

PowerFilm Solar Rollable Solar Panels - Charging (12V System)

 
12V Solar Battery Charging Diagram: Marine, RV, Car Battery Maintenance, Field Communications, Radios, Heavy Equipment, Golf Cars, Military, Lighting, Security Systems

Charge or Direct power 12V Systems:



Daily Run Times (in hours)
Based on 5 hours of full sun per day.


Indicated below are examples of average run and charge times for common uses for PowerFilm® Rollable Solar Panels. For example, an average 12V fish finder consumes 0.83 Amps per hour. With the R-7, a typical day with five hours of full sun will allow the fish finder to run for 2.8 hours and the R-21 would allow the fish finder to run for 8.3 hours.



5 hours of full sun will allow you to power your wireless electronics for __ hours

Charge or Direct Power 12V Systems R-7 R-14 R-21 R-28

 

daily run time in hours

12V fish finder (0.83 Amps)

2.7

5.4

7.2

10.9

12V GPS (0.43 Amps)

5.2

10.5

14

21

12V Bilge Pump (3.00 Amps)

0.8

1.5

2

3

Outdoor Lighting (0.80 Amps)

2.8

5.6

7.5

11.3

14" Color Television (3.33 Amps)

0.7

1.4

1.8

2.7

Search Light (8.30 Amps)

0.3

0.5

0.7

1.1

CB Radio (0.42 Amps)

5.4

10.7

14.3

21.5


Instructions for Use:


  01.  

Unroll and place so solar panel (dark side) is face up with orientation to sun.

  02.  

With the grommets on each of the corners, use a tie cord to hold the panel in place. This is important to reduce loss or damage from high winds.

  03.  

Ensure the solar panel cord out of the junction box is well connected to the included 15 ft. extension cord. (Fig. 1)

  04.  

Identify the correct polarity! (Red +, Black -)

  05.  

Attach the o-ring battery terminal connectors at the end of the extension cord to your 12 volt battery or the 12 volt device you are directly powering. (Fig. 2)

  06.  

You may leave the panel permanently connected to your battery since there is an included blocking diode in the junction box that blocks reverse draining of current from your battery. As with any permanent connection to a battery, safely clean the connections on a periodic basis as needed.

  07.  

To store the product, simply disconnect the cords and roll with the SOLAR PANEL FACING OUT. Use the attached Velcro® strip to hold the roll in place.

12V Solar Battery Connection



FlexSolarCells.com is a division of Meitzen Enterprises, LLC - All content and images presented on this website are copyrighted © and all rights are reserved. Copying without expressed written permission is forbidden. Valid HTML 4.0 Transitional
approved